The Sant Longowal Institute of Engineering and Technology-Guna is in charge of directing SLIET SET. SET is a portal that enables the contender to look for inductions into the rundown of courses offered at Sant Longowal Institute of Engineering and Te

  • Overview
  • Important Dates
  • Application Form
  • Eligibility Criteria
  • Exam Pattern
  • Others

The Sant Longowal Institute of Engineering and Technology-Guna is in charge of directing SLIET SET. SET is a portal that enables the contender to look for inductions into the rundown of courses offered at Sant Longowal Institute of Engineering and Technology into different streams including Engineering and Technology, Sciences, Humanities and Management. Confirmations through SLIET SET are offered to the accompanying courses:

(an) Integrated Certificate-Diploma (ICD) (b) BE (c) MTech (d) MBA (e) MSc (f) PhD

The exam is normally led in 5 distinct SETS specifically, SET I/SET II/SET III/SET IV/SET V. These SETs are led for the accompanying courses:

  • SET I – For Integrated Certificate-Diploma (ICD)
  • SET II – For BE
  • SET III – For MTech
  • SET IV – For MBA/MSc
  • SET V – For PhD

Up until now, the points of interest for SLIET SET 2019 have not yet been discharged. In any case, in the year 2019, the exam was effectively led in the period of June and July. Points of interest identified with SLIET SET 2019 will be set aside a few minutes.

Leave Your Details for Further Updates

 

SLIET 2019 Exam Tentative Dates

 The authorities of institute have declared some dates which covered all the activities that held during the period of filling application form and taking admission into a college successfully by candidates.

Name of the Events Important Dates
Starting Date of Application Form In the last week of March 2019
Last Date for Submission of Application Form for SET-I, SET-IA, SET-III and SET-IV In the first week of May 2019
Last Date for Submission of Application Form for  SET-V In the second week of June 2019
SLIET 2019 Entrance Exam Date for SET-I, SET-IA, SET-III In the first week of June 2019
SLIET 2019 Entrance Exam Date for SET-V In the second week of July 2019

SLIET SET Application and Registration Form 2019

General rules while filling the SLIET SET 2019 application frames

  • The applicant will sign on to the official site and snap continues for SLIET SET Admission and after that the enlistment.
  • Then they should tap on to the NEW REGISTRATION tab and for officially enrolled clients, enter Login and Password.
  • Before the hopefuls continue with the enlistment, they are encouraged to experience the qualification criteria and reservation arrangement for the COURSE/Program that they are intrigued to apply for.

4.Before last accommodation of online Application Form, the hopefuls are encouraged to painstakingly read the revelation given on the site and furthermore give their assent on it, coming up short which you won’t have the capacity to finish your enrollment.

  1. Please note that after effectively presenting the Application Form, the competitor will get a SMS on their enrolled Mobile that will guarantee their temporary enlistment effectively with a Form Number and Password.
  • effectively submitting Online Application Form for SET-2019, mercifully note down your Form Number for future reference. The preparing of Application Form will start simply after effective installment of the SLIET SET 2019 Application Fee.
  • 7.Once the installment is affirmed, the online Registration Page for PRINT will be made accessible for the hopefuls.
  • The in print form of the Registration Page appropriately filled in/marked must to be sent to “THE CHAIRMAN SET-2019, SANT LONGOWAL INSTITUTE OF ENGINEERING and TECHNOLOGY (SLIET), LONGOWAL – 148106 (DISTT. SANGRUR), PUNJAB” in the envelope by Registered/Speed Post just, in order to reach emphatically inside multi week of the last date of the individual program.
  • The candidates are additionally educated to hold a copy with respect to at that point properly filled in Registration Page for future correspondence, if required. In the event that an applicant submits in excess of one Registration Page, their candidature will be subjected to crossing out and suspended for future examination(s).
  • Photograph: Firmly attach two ongoing high difference international ID estimate hued photo in the space given to it in the Registration Page.
  • The photo must show plainly the name of the applicant alongside the date of taking the photo. It ought to be without top or goggles. Displays are permitted.
  • Polaroid photographs are not adequate. Applicants not consenting to these directions or with hazy photo are subject to be rejected.
  • Candidates will keep 10 indistinguishable photos for possible later use for later use at the season of Entrance Examination/Counseling/Document Verification/Admission.
  • 14.Request for change or rectification of any data, once given in the Registration Page, will not be engaged under any conditions.
  • 15.The establishment won’t be in charge of any results emerging in the event of renunciation of any revision/expansion/erasure in a specific once filled in the application shape, at all the reasons might be.
  • 16.Process of enrollment will be ONLINE as it were. Online Application Fee is as under:
  • General and Other Categories (Boys) for Rs.1200/*-
  • General and Other Categories (Girls) for Rs. 800/*-
  • SC/ST (Boys and Girls) for Rs 600/*-

NOTE: Bank Charges Extra Mode of installment E-Challan, Net managing an account, Debit and Credit Card

Ventures to fill the online applications for SLIET SET 2019

  • The initial steps will be to login on the official site and tap on the SLIET SET 2019 Application Form tab.
  • The window opened will at that point show a long shape requesting that you fill all the required fields that ought to be authentically right.
  • Once every one of the points of interest are outfitted, the applicants can present the frame.
  • The following stage will be to transfer the examined duplicates of their ongoing travel permit estimate photos and signature in the recommended design.
  • When the archives required are effectively transferred, the competitors will be solicited to influence the installment from the recommended application to charge in the accessible installment modes.
  • Filling application shapes implies that a competitor is enrolled to show up for the SLIET SET 2019 examination. On the off chance that instance of disappointment, the applicants won’t be permitted to show up for the exam and look for confirmation, under any ordinary conditions..

KEE Eligibility Criteria 2019

Before continuing towards filling the application shape competitors must check and meet the KEE 2019 qualification criteria recommended by the specialists. Said beneath are the qualification criteria of KEE 2019 for the possibility to allude and apply as needs be.

B.Tech Programs (Except Bio Programs)

  • Candidate probably cleared 10+2 or identical exam with least of half checks total in PCM

or then again

  • Passed 10+2 in Vocation Stream (subjects can be General Mechanist, Electrical Machines and Appliances, Electronic Equipments, Draughtman Civil, and so forth.) and any of Physics, Chemistry, and Mathematics with least half in total

B.Tech in Bioinformatics, Biotechnology, and Food preparing and Engineering

  • Passed class 12 or comparable with least half total checks in PCM

or on the other hand

  • Passed 10+2 or any proportionate exam in the primary endeavor with least half total checks in Physics, Chemistry and Biology/Zoology/Botany/Computer Science

Age Limit: The applicant must not be over 21 years as on July 1, 2019

SLIET SET Pattern 2019

  • Take a look below at the pattern for admissions to the programmes offered through SLIET SET.
  • The SLIET SET 2019 will be just one paper of two & half hours duration. It will comprise of a total of 150 marks for each of the SET-I, SET-1A & SET-III.

For SET-V, it shall be a two hours duration exam and will carry 100 marks.

Note : There will be objective type questions with four options having single correct answer.

  • For each incorrect response, one fourth (1/4th) of the total marks allotted to the question would be deducted for SET-I, SET-IA and SET-III.
  • There shall be no negative marking for SET-V (PhD Programmes).
  • However, no deduction of marks will be made if no response is indicated for a question in the OMR Answer Sheet.
  • The candidates appearing for the SLIET SET 2019 Examination are advised not to attempt any questions if they are not sure of the correct answer.
  • More than one answer indicated against a question will be considered as incorrect response and will be negatively marked.
  • All the objective type questions are mandatory to be answered on the OMR Answer Sheet that will be provided at the time of Examination.
  • Answers to all the questions are to be marked using ball point pen (black / blue) only.

SLIET SET Syllabus 2019

SET-III SLIET Entrance Test (SET-III) for admission to BE

(Parallel Entry) will comprise of one paper of two and half hours span.

This paper will have 150 target compose inquiries of 150 imprints from English, General Knowledge, Mental Aptitude, Mathematics, Physics, Chemistry and Basics of Engineering (proper gathering).

Note: Answers of the target compose questions are to be filled in the OMR answer sheet given independently amid the Examination.

There will be 25% negative stamping for wrong answers.

  • “SYLLABUS AND MODEL QUESTIONS” Marks: 150 Time: 2½ Hours
  • “GENERAL KNOWLEDGE, MENTAL APTITUDE” and ENGLISH Marks: (20 Questions)

The paper will incorporate inquiries covering the accompanying themes:-

  • General Science
  • Current occasions of National and International significance
  • History of India
  • Indian Politics and Economy
  • Indian National Movement
  • General Mental capacity
  • Idioms/Phrases
  • Usage of Tenses
  • Change the type of Narration
  • Fill in the spaces with appropriate words.

Arithmetic Marks: 20 (20Questions)

  • Algebra: Solution of quadratic conditions, connection between their underlying foundations and coefficients.
  • Equations reducible to quadratic condition. Symmetric Functions of roots.
  • Formation of a quadratic condition with given roots. Number-crunching movement, Geometric movement and Arithmetico-Geometric arrangement. Arrangement of normal numbers (? n, ? n 2, ? n 3).
  • Mathematical acceptance. Changes and Combinations. Binomial hypothesis for any file.
  • Trigonometry: Trigonometric proportions and their relations.
  • Trigonometric Identities.
  • T-proportions of united edges.
  • Addition and Subtraction formulae.
  • Transformation of item into entirety or contrast and the other way around.
  • T-proportions of different and sub-various points.
  • Heights and separations.
  • Solution of Trigonometric Equations.
  • Coordinate Geometry: Rectangular Cartesian directions.
  • Distance between two focuses.
  • Section formulae.
  • Locus of a point.
  • Equation of a straight line in different structures.
  • Angle between two given lines.
  • Condition for two lines to be parallel or opposite.
  • Distance of a point from a line.
  • Line through purpose of crossing point of two given lines.
  • Concurrency of lines.
  • Equation of a hover in different structures.
  • Intersection of a hover with a straight line.
  • Intersection of two circles.
  • Equations of the parabola, oval and hyperbola in the standard structures.
  • Calculus: Function, its area and range.
  • Limit, progression and differentiation of a capacity.
  • Derivative of entirety, contrast, item and remainder of two capacities.
  • Derivative of arithmetical, trigonometric, exponential, logarithmic, hyperbolic and reverse trigonometric capacities.
  • Chain run the show.
  • Derivative of capacities communicated in verifiable and parametric structures.
  • Maxims and Minims.
  • Equation of digression and ordinary.
  • Integration as the opposite procedure of separation.
  • Integration by parts, by substitution and by incomplete portions. Incorporation of sound and unreasonable capacities.
  • Definite fundamental and its application for the assurance of region (straightforward cases).

Science Marks: 15(questions)

  • Atoms, Molecules and Chemical Arithmetic: Symbols, formula, oxidation, decrease, oxidation number, adjusting of straightforward substance conditions, mole idea, experimental formula and atomic formula.
  • Chemical families – Periodic Properties: Mendeleev’s and Modern intermittent tables, arrangement of components into s, p, d and f squares, occasional properties (ionization potential, electron fondness, nuclear and ionic radii, oxidation states).
  • Atomic Structure, Bonding and Molecular Structure: Bohr’s hypothesis, brief portrayal of hydrogen range, the wave idea of issue, de-Broglie’s hypothesis, Uncertainty standard, Quantum numbers, Pauli’s rejection guideline, Hund’s govern of most extreme variety, states of orbitals, electronic setup of iotas upto nuclear no.
  • Types of holding (ionic, covalent and arrange covalent), Lewis structure, VSEPR hypothesis, Molecular orbital hypothesis and atomic shapes, hybridization (sp, sp 2 and sp 3 ) and sub-atomic structure, hydrogen bond, metallic bond, Vander Waals powers.
  • PHYSICS Marks: 15(15Questions) Description of Motion: Motion in a straight line, uniform movement, speed and speed, condition of movement in a straight line, position time chart, prompt speed and quickening, movement in two measurements, shot movement, uniform roundabout movement, torque, precise energy, protection of rakish energy, centripetal and radial powers, place for mass, movement of focus of mass and force preservation.
  • Moment of Inertia: Moment of Inertia (M.I.) of unbending body, span of gyration, hypothesis of parallel and opposite tomahawks, M.I. of a straight bar, roundabout ring, round plate, connection amongst torque and M.I., active vitality, movement of direct mass fixing toward the string to the injury on a barrel, movement of chamber moving without slipping on a slanted plane.
  • Kinetic Theory of Gasses: Boyle’s and Charles’ laws, gas condition, gas consistent, weight applied by gas, dynamic vitality of atoms, motor elucidation of temperature, deduction of gas laws from active hypothesis of gases.
  • Electromagnetic Wave, Atomic and Nuclear Physics: Production and properties of e.m. waves, e.m. range, nature and speed of e.m. waves, spread of radio waves in earth’s climate, photoelectric impact, laws of photoelectric impact, generation of x-beams, delicate and hard x-beams, employments of x-beams, Radio action laws, half-life and normal life for radioactive materials, atomic parting and combination.
  • Objective Type Questions Fill the decision of the elective you think to be right answer in the OMR answer sheet.

Rudiments OF ENGINEERING GROUP – An (Electrical, Electronics and Computer Group) Marks: 80 (80 Questions)

  • Operating System: Introduction to different working frameworks, single client, multiuser, group handling, time sharing, continuous, multiprogramming and multiprocessing frameworks, appropriated figuring, assets administration, memory administration; System Software: Introduction, framework programming, application programming, compilers, constructing agents, loaders, linkers;
  • Application Development: Algorithms and flowcharts, program composing, troubleshooting and execution, aggregation, elucidation, programming utilizing C dialect, Object Oriented Programming ideas;
  • Information Technology (IT): Internet and its applications, internet browser, E-mail; e-advertising and e-installment
  • Data administration and association: Introduction to databases, engineering and structure of DBMS, information models;
  • Introduction to information structure: exhibits, connected rundown, stacks and lines;
  • Computer Networks: Applications, prologue to OSI and TCP/IP, Networking topologies/advancements;
  • Latest Technologies: Latest processor and memory setups and related advances.
  • Software Engineering: Software Development Life Cycle, Software measurements, Coding and Testing;
  • Computer System Architecture: Number framework, Boolean Algebra, K-delineate, groups, Addressing modes, I/O interfacing, Control unit association, Pipelining, Cache and fundamental memory, Modes of information exchange.
  • Conductors, semiconductors, encasings, Extrinsic and Intrinsic semiconductors.
  • PN Junction Diode – its V-I qualities, Rectifiers, channels.
  • BJT – different transistor setups, their information/yield qualities.
  • Modulation – Need and kinds of regulation (AM, FM, PM).
  • Radio Receivers – TRF and super heterodyne. Heartbeat adjustment PAM,PCM,, PWM, PPM.
  • Logic doors – Definition, images and truth table of NOR, OR, AND, NAND, EX-OR entryways, different Flip Flops (SR, JK, T, D), Registers and Counters.
  • Operational Amplifier – Inverting and Non transforming intensifiers, Op Amp as an inverter, scale changer, snake, subtractor, differentiator, and integrator.
  • AC essentials: single stage, rms esteem, top to crest esteem, normal esteem.
  • RL, RC and RLC circuits, Power and Power factor, control estimation.
  • DC& AC Bridges: Wheatstone connect, Maxwell’s Bridge, De-Sauty’s Bridge, Owen’s Bridge, Kelvin’s Double Bridge, Hay’s Bridge.
  • Network Theorems: Thevenin’s, superposition, Norton, most extreme power exchange hypothesis, correspondence and Tellegen’s hypotheses.
  • Electromagnetic and Magnetic circuits: Principle of AC and DC machines and Transformers.
  • DC Circuits: Circuit parts (resistor, inductor and capacitors) and DC Circuits reverberation.
  • Errors in estimation framework, Galvanometer, PMMC and Moving iron instruments, DC potentiometers, Multimeter, LED/LCD/Segment Displays, CRO, Basic parts of instrumentation framework, sensors and transducers, resistive, capacitive and inductive transducers.
  • Signal Conditioning: A/D and D/A converters, separating and impedance coordinating, operational intensifiers..

Gathering – B (Mechanical Group) Marks: 80 (80Questions)

  • Thermal Engineering: Basic ideas, thermodynamic properties: natural and outward, open, shut and segregated frameworks, warmth and work, particular warmth, warm and thermodynamic balance, Zeroth law and first law of thermodynamics, inside vitality, entropy, enthalpy.
  • Clausius and Kelvin-Plank explanation of second law, diverse thermodynamic procedures like isobaric, isochoric, isothermal, and reversible adiabatic, C.I. motor, S.I. motor, Otto Cycle, Diesel Cycle, Carnot Cycle,
  • Steam Formation: Dry, Wet Steam, Dryness Fraction Applied Mechanics, Strength of Material and Machine Design: Concept of mechanics and connected mechanics, laws of powers, minutes, grating and laws of movement.
  • Stress and strain, idea of load, elastic, compressive, shear pressure, torsion, Bending Moments and strains. Sections, Springs, Beams, push fixation, sorts of stacking, speculations of disappointment, factor of wellbeing, perseverance confine, productivity of bolted and welded joints, keys and its composes, worry in shafts, plan of shafts (strong and empty).
  • Fluid Mechanics: Concept of liquid, liquid mechanics and power through pressure, properties of liquid (thickness, particular weight, particular volume, particular gravity) with their units.
  • Pascal’s law, idea of environmental weight, measure weight, supreme weight, vacuum and differential weight, Buoyancy, Center of Buoyancy, Metacentre, Metacentre Height and Application.
  • Manufacturing Engineering and Management: Introduction and grouping of engineeringmaterials, warm, concoction, electrical and mechanical properties of normally utilized designing materials.
  • Purpose of warmth treatment, different warmth treatment forms like cyaniding, nitriding, solidifying, case solidifying, strengthening, normalizing, hardening, and their applications.
  • Arc and gas welding forms, design materials and example stipends utilized in design making, centers, fundamental foundry procedures and powder metallurgy.
  • Different machining tasks, standards of activities, cutting apparatuses and machine instruments used to complete turning, processing, penetrating, molding and arranging tasks.
  • Quality control, control diagrams, acknowledgment inspecting, TQM. Plant area, format and line adjusting. Sorts of plant formats.
  • Inventory control, Inventory order, and EOQ and ABC examination.

Gathering – C (Chemical and Food Group) Marks: 80 (80Questions)

  • Chemical Engineering Thermodynamics: Laws of thermodynamics, thermodynamic properties, general thermodynamic connections.
  • Application for open/shut frameworks and reversible/irreversible procedures, Raoult’s Law.
  • Chemical response balance.
  • Chemical Reaction Engineering: Molecularity and request of response, response energy, distinctive sorts of perfect reactors and their execution conditions.
  • Heat Transfer: Different methods of warmth exchange with administering connections, Fourier’slaw, Steady state warm exchange through plain and composite section, Cylindrical and circular surfaces, Natural and constrained convection, Radiation warm exchange.
  • Heat exchange gear and their modern applications.
  • Mass Transfer: Fick’s law of dispersion, Mass exchange tasks and their applications, Molecular dissemination, vortex dispersion, dispersion in solids.
  • Simple (differential) refining, Rectification (Fractionating section) refining, crystallization, drying – Moisture content on dry and wet premise, Equilibrium dampness substance, Constant and falling rate stage estimations, Critical dampness content, ingestion, hardware for division and mechanical application.
  • Unit tasks: Calculation of vitality required in pounding by Ritinger’slaw and Bond’slaw, Mixing list, Rate of blending, disturbance, Constant rate filtration, consistent weight filtration, Filter cake compressibility, Centrifuge gear like cream separator and clarifiers utilized in dairy industry, crystallization.
  • Fluid stream: Physical properties of liquid, Classification of liquid stream, Continuity condition, Bernoulli’s hypothesis, Concept of Reynold’s number and its assurance, Flow through parallel plates and round funnels, Different sort of pumps like centrifugal,reciprocating, turning and cylinder relocation pumps, Concept of thickness, Newtonian and non-Newtonian liquids.
  • Material and Energy adjust: Material and vitality adjust computation in forms with reuse/sidestep/cleanse.
  • Chemical Process Industries: Raw material and process portrayal for the assembling of alkali, urea, ammonium phosphate, concrete, pop powder, scathing pop, glass, sulphuric corrosive, hydrochloric corrosive and nitric corrosive.
  • Process Instrumentation: Instruments for temperature, weight, fluid level, stream and pH estimation.
  • Environmental Engineering and Safety: Different sorts of fluid, air and strong contamination from ventures, impact of concoction contamination on nature and condition.
  • Pollution control strategies. Perils from squanders, poisonous gases, synthetic compounds; indications and their healing activity. Fire, commotion contamination in industry and their control.
  • Food Chemistry and Microbiology : Classification, physical and concoction properties of sugars, proteins, lipids; kinds of colors, vitamins and minerals; morphology, techniques for propagation and sorts of microorganisms and parasites; microbiology of different nourishment items.
  • Food Process Technology: Milling of grains and heartbeats; oil extraction strategies; institutionalization, homogenization and purification of fluid drain; meat and poultry handling; creation of alcoholic and non-mixed drinks; innovation of assembling of leafy foods items; diverse conservation methods in sustenances.
  • Food Analysis and Quality Control : Quality traits; nourishment defilement and its identification; physico-compound and mechanical properties of sustenances; tactile assessment; HACCP; Food Safety and Standards Act.

SLIET SET Admit Card 2019

The SLIET SET 2019 concede card will be given in copy. One of the SLIET SET 2019 Admit Card must be kept at examination focus at the season of examination and other duplicate will be held by the contender for sometime later.

The SIET SET Admit Card can be downloaded from Institute official site www.sliet.ac.in.

  • If there should be an occurrence of any trouble in printing/downloading the Admit Card, the hopeful should contact/advise the Issuing Authority as prior to the due date. The shape number/move number is the prime means for finding the application and it ought to dependably be cited in all correspondence and enquiry.
  • The hopefuls neglecting to convey their concede cards to the exam focuses won’t be allowed to enter the examination lobby.
  • The SLIET SET concede card implied for the hopeful ought to be saved painstakingly.
  • Ventures to download SLIET SET concede cards
  • To begin with, the hopefuls should visit the official site of the college.
  • When you have the landing page in from of you, tap on the Download Admit Cards tab.
  • On clicking, the hopefuls will be requested to enter their qualifications including the application number, date of birth, and so forth.
  • On presenting the right points of interest, the hopeful’s concede card will be shown on the screen.
  • Check the every single conceivable detail said on the concede cards. On the off chance that the understudy finds any disparity in the concede Card, the same might be suggested to the workplace for important revision.
  • We encourage the contender to download and furthermore take a print of their SLIET SET 2019 concede cards.
  • This is to be safeguarded until the point when the last affirmation procedure of finished effectively.

SLIET SET Result 2019

  • SET-I/SET-IA/SET-III : 14 Jun 2019
  • BE Program (4-Yr):
  • Admission to BE will be founded on JEE (Main)- 2019 and guiding through CSAB/JoSAA-2019.
  • For Institute spot confirmation CSAB/JoSAA-2019 timetable will be taken after. Allude Institute site www.sliet.ac.in every once in a while.
  • BE (Lateral Entry) :
  • Legitimacy rundown will be set up in three general classes independently i.e.
  • Gathering A – Electronics/Computer/Instrumentation
  • Gathering B – Mechanical,
  • Gathering C – Chemical and Food

The Candidate who qualifies in SLIET Entrance Test (SET-III) will be conceded in a similar Group in which he/she has connected and showed up.

SLIET SET Counseling 2019

  • Investigate the advising procedure for admissions to the BE programs offered through SLIET SET.
  • An internet directing will be led for the SLIET SET exam qualifiers. The advising procedure will be directed for building applicants as it were.
  • The correct timetable of the SLIET SET web based directing, record confirmation and accommodation of affirmation expense will be made accessible on the Institute site www.sliet.ac.in in the due time.
  • Once the temporary assignment of seat and Document Verification is effectively led, the Submission of Admission Fee will occur at SLIET Campus, Longowal. The seats distributed temporarily will be dropped if in the event that the hopeful neglects to get the archives confirmed and the application expense isn’t stored amid the endorsed period.
  • No different Call Letters will be sent to the contender for Counseling/Document Verification/Submission of Admission Fee.
  • Be that as it may, if on the off chance that a hopeful neglects to go to the internet advising, they will be permitted to go to the following session of guiding, the calendar for which will be discharged after the principal directing session is effectively led.
  • Such applicant should monitor the following accessible directing calendar which will be shown on Institute site and take part in that without sitting tight for any hint in such manner.
  • The hopefuls will likewise be required to present a scholarly duplicate of charge store receipt and acquire a Final Seat Allotment Card after report check and expense store to finish the affirmation procedure.
  • The means to be taken after for web based advising and qualification conditions for partaking in each round of Counseling will be made accessible in the due time on the official site of the establishment.
Add Review